MVRsimulation at Conferences, Trade Shows, and Other Events

Upcoming Events

• December 2 - 6, 2024: Meet MVRsimulation at I/ITSEC 2024 in booth #727.

Past Events

• September 17 -19, 2024: Meet with MVRsimulation at the Joint Close Air Support (JCAS) Curriculum Review in Virginia Beach for demonstrations of the PJFT and DJFT.
• May 6 - 10, 2024: See MVRsimulation's VRSG providing visuals in the PAR Government booth (#3211) at Special Operational Forces (SOF) Week 2024.
• April 24 - 26, 2024: VRSG provided visuals for the Phoenix Mixed Reality Apache Training simulator running demonstrations on the Digiflight booth (#223) at AAAA (QUAD-A) in
• February 7 - February 8, 2024: MVRsimulation will be present at the Military Virtual Training & Simulation Summit in Orlando, Florida.
• January 10 - January 11, 2024: MVRsimulation was at WEPTAC 2024 in Las Vegas, Nevada, located in the Aviation Theater on the main floor of the Nellis Officer's Club.

• November 27 - December 1, 2023: MVRsimulation was present at I/ITSEC 2023 in booth #1019. It was during this event where MVRsimulation showed off its mixed-reality Sand Table.

• Tuesday May 2 - Thursday May 4, 2023: The MVRsimulation demonstrated the DJFT and PTMT at the Battlespace Simulations annual MACE User Group (MUG) at the Destin-Fort Walton Beach Convention Center, 1250 Miracle Strip Pkwy SE, Fort Walton Beach, Florida.
• March 21-23, 2023: MVRsimulation attended the U.S. Forces Japan (USFJ) LVC-J Design Workshop in Kadena AB, Okinawa, Japan.
• January 31 - February 2, 2023: MVRsimulation attended the JFS Symposium and JCAS Curriculum Review in Virginia Beach, VA, demonstrating the Deployable Joint Fires Trainer (DJFT) in VRSG's Kismayo, Somalia terrain.
• November 28- December 2, 2022: MVRsimulation's Deployable Joint Fires Trainer (DJFT) and Fixed Wing Part Task Mission Trainer (PTMT) on display at I/ITSEC in Orlando, Fl. Booth #1187.
• July 20-21, 2022: MVRsimulation's Deployable Joint Fires Trainer (DJFT) was featured in a presentation titled "Integrated Distributed Training for Future Mission Requirements" delivered by Lt Col Lee Stanford, Director, and Mr Steven Allen, Distributed Training Center, USAFE-AFAFRICA Warrior Prep Center, USAF, at the Joint Military Training & Simulation Conference on 21st July, 2022.
• May 3-5, 2022: MACE User’s Group (MUG), at the Emerald Convention Center, Florida. MVRsimulation at Battlespace Simulations’ annual meeting for users of MACE. Demonstrations include MVRsimulation’s fixed-wing Part Task Mission Trainer (PTMT), along with Virtual Reality Scene Generator (VRSG).
• April 26-28, 2022: MVRsimulation's Virtual Reality Scene Generator (VRSG) in action at ITEC 2022 as part of the JTC TRS Simulator Demonstration in the CAE booth (#F1).
• April 3-5, 2022, at the 2022 Army Aviation Association of America Annual Summit. MVRsimulation’s Virtual Reality Scene Generator (VRSG) featured in booth #952 as part of the Mixed Reality Apache Training simulator, comprised of technologies from a consortium of companies. The demonstrator is a single-seat Apache co-pilot configuration with hardware provided by Bugeye Technologies Inc. ZedaSoft Inc. provides the simulated OFP software and integration. A high-fidelity Apache flight model validated by the Redstone Test Center supplied by Bihrle Applied Research Inc. PLEXSYS Interface Products, Inc. delivers the Sonomarc simulated radio communications and VADAAR debriefing system, with visuals provided by VRSG.
• November 9 - December 3, 2021, at IITSEC21, MVRsimulation's Part Task Mission Trainer (PTMT) was demonstrated in Varjo's booth (#3010) and in Battlespace Simulation's booth (#1049). In Textron's booth (#549), VRSG was running in the Bell Invictus 360 demonstration device. In ZedaSoft's booth (#1573), VRSG was running in multiple flight simulators, including the Mockingbird RPA simulator. In BugEye Technologies' booth #1549, VRSG was running in the mixed-reality Apache simulator. Immersive Display Solutions ran VRSG in their Trailer-Based Joint Fires Training System (TBJFTS) in booth #1768.
• October 28, 2021, MVRsimulation (formerly MetaVR) VRSG was demonstrated in ZedaSoft's cockpit simulators at the Redstone Small Business Industry Day, held at the Von Braun Convention Center, Huntsville, AL. In booth 71A and 72A, VRSG rendered their Hohenfels, Germany, US Army Garrison terrain database. Also at this event, Bugeye Technologies demonstrated VRSG in its mixed-reality Apache Reconfigurable Virtual Cockpit Trainer (RVCT).
• October 25-27, 2021, MVRsimulation VRSG was demonstrated in ZedaSoft's cockpit simulators at the PLEXSYS User Group (PUG), held at the Marriott Hotel, Camas WA. VRSG rendered Southwest USA and Afghanistan terrain databases.
• October 25-26, 2021, MVRsimulation VRSG was demonstrated in ZedaSoft's cockpit simulators at the Air National Guard Weapons and Tactics Conference, held at the Doubletree Hotel, Tucson AZ. VRSG rendered Southwest USA and Afghanistan terrain databases.
• October 5 - 7, 2021, MVRsimulation visuals were demonstrated at the Battlespace Simulations (BSI) MACE User's Group meeting. The meeting took place at the Emerald Convention Center, Fort Walton Beach, FL. MVRsimulation  demonstrated VRSG and MACE its new Part Task Mission Trainer (PTMT), with the Varjo XR-3 mixed reality headset.
• March 10 - 11, 2020, MVRsimulation visuals were integrated with VR systems demonstrated in D3A's booth at the annual Defence Simulation Education and Training (DSET) conference held in Bristol, UK. The demo featured VRSG in a mixed reality mortar fire controller (MFC) within a 360-degree virtual environment.
• December 2 - 6, 2019, MVRsimulation exhibited its products and technology in Booth #1348 at I/ITSEC 2019, held at the Orange County Convention Center, Orlando, FL.
• November 20 - 21, 2019, MVRsimulation visuals were demonstrated at the annual Close Air Support Conference and Exhibition, held in Reading, UK. MVRsimulation visuals and 3D content were demonstrated in QuantaDyn's Joint Fires Mobile Trainer (JFMT).
• October 14 - 16, 2019, AUSA Annual Meeting and Exposition, in Shephard Media's Booth #1853, MVRsimulation teamed with Shephard for a demonstration of MVRsimulation real-time 3D vehicle and UAS models integrated with Shephard Media’s Defence Insight data, showing accurate system attributes, sub-systems, and user base data, adding a unique layer of fidelity for the simulation and business strategy communities.
• June 17 - 23, 2019, General Atomics Aeronautical Systems (GA-ASI) featured MVRsimulation VRSG in their Sky Guardian UAV ground control station demo, and in the demo of GA-ASI's new STARE multi-INT system at the Paris Air Show, at the Parc des Expositions Paris-le Bourget, Aéroport Paris-le Bourget, France.
• May 14 - 16, 2019, PLEXSYS Interface Products demonstrated MVRsimulation visuals and 3D content integrated in its ASCOT 7 CGF in stand ID30 at ITEC 2019, held in Stockholm, Sweden. Also in stand ID30, ZedaSoft used MVRsimulation visuals and 3D content in its cockpit simulator as part of their demo of MiLToC role player man-in-the loop simulation software.
• April 14 - 16, 2019, MVRsimulation visuals and 3D terrain were featured at the Army Aviation Association of America (Quad-A) 2019 Summit, in TRU Simulation + Training demos of their V-280 technology demonstrator and Adaptable Mission Trainer in booth #512.
• March 19 - 20, 2019, QuantaDyn and Elbit Systems UK demonstrated their Joint Fires Mobile Trainer (JFMT), which uses MVRsimulation's visuals and 3D content, at DSET 2019 in Bristol, UK. The JFMT is in active service with the JTAC and Fire Support teams of the British Army's 1st Artillery Brigade. The self-contained mobile classroom (within a 20 ft. trailer) is a fully equipped immersive environment for training JTACs, FACs, and JFOs.
• March 8, 2019, MVRsimulation participated in the Air Force Academy Industry Day, held onsite at the Academy in Colorado Springs, CO, and hosted by the Department of Military & Strategic Studies. The purpose of the event was to provide the Department with an opportunity to perform market research on potential vendors for an anticipated renovation of the Academy's wargaming, modeling, and simulation lab. MVRsimulation demonstrated, with business partners Battlespace Simulations (BSI) and Immersive Display Solutions (IDSI), VRSG along with BSI MACE and IDSI's new VisionStation 3. Also at the event, ZedaSoft demonstrated its new EyeBox augmented reality training solution, which uses MVRsimulation visuals in the SA Photonics SA-92 HMD.
• February 5 - 8, 2019, MVRsimulation visualization technology was demonstrated at the annual Joint Fires /Joint Close Air Support (JF/JCAS) Symposium and Curriculum Review, held at the Westin Hotel Town Center, Virginia Beach, VA. In collaboration with TRU Simulation + Training, Battlespace Simulations (BSI), and Immersive Display Solutions (IDSI), demonstrations with VRSG included TRU's Light Attack Aircraft Mission Trainer featuring VRSG and BSI MACE and IDSI's new VisionStation 3, and BSI and MVRsimulation's desktop JTAC simulator. Radiance Technologies' Operator Procedural Trainer, an ISR operator task trainer that also uses VRSG, was networked with TRU's simulator in the demos.
• November 26 - 30, 2018, MVRsimulation exhibited its products and technology in Booth #1249 at I/ITSEC 2018, held at the Orange County Convention Center, Orlando, FL.
• November 14-15, 2018, the USAF Air National Guard JTAC Simulation Program, which uses MVRsimulation visuals in its JTAC training simulators (including the AAJTS dome simulator), was featured in the CAS/JTAC Session at the annual Close Air Support Conference held in Bristol, UK. Ronald Kornreich, Program Manager, Training & Simulation Systems, USAF ANG, spoke during the session.
• November 6-9, 2018, MVRsimulation visuals were in several UAS simulation demonstrations at the 2018 JSIL-Capabilities And Requirements Technical Exchange (J-CARTE) event. J-CARTE was held at the Dynetics Solutions Complex, Huntsville, AL. VRSG is featured in multiple JSIL UAS programs including trainers that use the Multiple Unified Simulation Environment / Air Force Synthetic Environment for Reconnaissance and Surveillance (MUSE/AFSERS) environment, the Army’s Shadow, Gray Eagle, Aerosonde, and Hunter UASs as well as the Air Force’s Reaper and Global Hawk trainers, embedded in schoolhouses and portable field simulators.
• October 16 - 17, 2018, ZedaSoft demonstrated MVRsimulation VRSG integrated in its virtual dome AR solution for fighter aircraft and helicopters at the Air National Guard (ANG) Weapons and Tactics Conference (WEPTAC) in Tucson, AZ. VRSG rendered out-the-window and sensor channels. MVRsimulation's Afghanistan geospecific 3D terrain was used for the demonstration.
• October 8-10, 2018, MVRsimulation visuals and terrain were featured in TRU Simulation + Training's V-280 Valor demonstration simulator at AUSA 2018, held at the Walter E. Washington Convention Center, Washington D.C.
• July 26 - 27, 2018, MVRsimulation participated in the AFWERX Project RACER workshop, held at the AFWERX facility in Las Vegas, NV. Upon invitation, MVRsimulation provided VRSG and the virtual terrain for the Rapid Action Combat Environment Recreation (RACER) proof-of-concept effort. RACER is a protocol that utilizes several existing systems to capture terrain data on a target of interest, convert that data to a format that warfighters can utilize in a virtual training environment.
• March 20 - 21, 2018, MVRsimulation was invited to participate in the remotely piloted aircraft (RPA) demonstration conference held in Des Moines, IA, and hosted by 132d Wing. The goal of the conference was to bring together all of the RPA training stakeholders and provide them with firsthand knowledge of the newly developed distributed training capabilities available to them through the 132 Wing’s Detachment 1 Distributed Training Operations Center (DTOC). Included in the demos were two that use MVRsimulation visuals: the JSIL's MQ-9 Reaper ER MJAT (MALET-JSIL Aircrew Trainer) and AFRL's MQ-1 and MQ-9 PRINCE (Predator Research Integrated Network Combat Environment).
• November 27 - December 1, 2017, MVRsimulation exhibited its products and technology in Booth #1249 at I/ITSEC 2017, which was held at the Orange County Convention Center, Orlando, FL.
• November 15 - 16, 2017, MVRsimulation was a sponsor of the annual Close Air Support Conference and Exhibition, held in Bristol, UK. MVRsimulation's business partner Close Air Solutions was the lead sponsor; MVRsimulation visuals and 3D content were demonstrated in their iCASS JTAC simulation system.
• October 16 - 17, 2017, ZedaSoft demonstrated MVRsimulation VRSG integrated in its role player station software at the Air National Guard (ANG) Weapons and Tactics Conference (WEPTAC) in Tucson, AZ, October 16-17, 2017. VRSG provided out-the-window and sensor channels. The MVRsimulation Afghanistan and Nellis Red Flag terrain (Nevada Test and Training Range) and cultural databases were used for these demonstrations.
• September 12 - 15, 2017, MVRsimulation business partners Close Air Solutions, Battlespace Simulations (BSI), and Immersive Display Solutions demonstrated at the DSEI Conference use of MVRsimulation VRSG and BSI MACE in the iCASS Joint Fires simulation training system. The ICASS, with a 4-meter curved display, was demonstrated in Stand S9-130. The conference was held at the ExCeL London.
• July 30 - August 4, 2017, MVRsimulation visuals, 3D geospecific terrain, and models were within the iCASS JTAC training system of business partner Close Air Solutions during one week of the two-week Exercise Terminal Strike 17-1. The training operation was comprised of a force-on-force fully immersive scenario encompassing multi-layered integrated air defenses in both urban and open environments. The Exercise was sponsored by the British Army's 1st Artillery Brigade, with participation by US and NATO forces.
• May 16 - 18, 2017, MVRsimulation visuals, 3D geospecific terrain, and models were part of QuantaDyn's demonstration of its portable JTC TRS system in Stand 18 at ITEC 2017, held at the Rotterdam Ahoy, Rotterdam.
• April 26 - 28, 2017, at Army Aviation Association of America, (AAAA or "Quad A") Annual Summit, held at the Gaylord Hotel & Convention Center, Nashville, TN, TRU Simulation + Training featured its V-280 Valor demonstrator simulator, which uses MVRsimulation visuals.
• April 4 - 6, 2017, MVRsimulation technology was demonstrated by business partner Close Air Solutions at the 2017 Joint Fires /Joint Close Air Support (JF/JCAS) Symposium, held at the Westin Hotel Town Center, Virginia Beach, VA. Close Air Solutions demonstrated ATAK (Android Tactical Assault Kit) interoperability with their MACE-VRSG based simulation system. They also assisted in showcasing the new enhanced EW capabilities of Battlespace Simulations' MACE, with associated beam viewer plugins in MVRsimulation VRSG.
• February 28 - March 1, 2017, MVRsimulation business partners Close Air Solutions and Immersive Display Solutions were sponsors of the Defence Simulation Education & Training (DSET) Conference, held at Ashton Gate, Bristol, UK. The companies demonstrated use of MVRsimulation VRSG and BSI MACE in a Joint Fires simulation training system with a 4-meter curved display.
• November 28 - December 2, 2016, MVRsimulation exhibited its products and technology in Booth #1026 at I/ITSEC 2016, which was held at the Orange County Convention Center, Orlando, FL.
• November 16 - 17, 2016, MVRsimulation was an associate sponsor of the annual Close Air Support Conference and Exhibition, held at the Hilton Reading Hotel, Reading, UK. MVRsimulation's business partner Close Air Solutions was the lead sponsor; they use MVRsimulation visuals and 3D content in their iCASS JTAC simulation system. On the first day of the conference, Close Air Solutions discussed current technologies (including VRSG) available to support JTAC initial and continuation training.
• October 24 - November 4, 2016, MVRsimulation visuals were featured in the Bold Quest 16.2 NATO exercise within the iCASS systems of business partner Close Air Solutions. Supporting UK Joint Forces Command, the two iCASS systems were in use at the UK Defence Simulation Centre at Boscombe Down. The systems were linked via the distributed network to the US 19th SOS AC130 Training Facility at Hulburt Florida, the 132d WG DTOC AH64 and A-10 at USSOCOM HQ for the distributed exercise.
• October 3 - 5, 2016, at AUSA 2016, held at the Walter E. Washington Convention Center, Washington D.C., TRU Simulation + Training featured its V-280 Valor demonstrator simulator, which uses MVRsimulation visuals.
• May 17 - 19, 2016, MVRsimulation visuals, 3D geospecific terrain, and models were featured in demos of two business partners at ITEC 2016, ExCel, London. In stands B110 and H112, QuantaDyn demonstrated a 4-channel JTAC simulator that is a simplified version of the JTC-TRS, using MVRsimulation visuals and IDSI's 220 curve display. MVRsimulation visuals are used in QuantaDyn's AJTS and in the JTC TRS. ZedaSoft's demonstrations in stand #F120 included VRSG used as out-the-window and sensor views in its CBA for Simulation Software framework with various role-player cockpit plug-ins. ZedaSoft also demonstrated its Mockingbird RPA/UAV software, which also uses MVRsimulation visuals.
• May 10 - 12, 2016, MVRsimulation exhibited and presented its products and technology at the 2016 Joint Fires /Joint Close Air Support (JF/JCAS) Symposium, held at the Westin Hotel Town Center, Virginia Beach, VA. The symposium was sponsored by the Joint Fire Support Executive Steering Committee (JFS ESC) and hosted by the Joint Staff J6.
• May 2 – 5, 2016, MVRsimulation's business partner Swift Radioplanes exhibited in Booth #1822 at the XPONENTIAL 2016 (formerly AUVSI) conference, held at the Ernest N. Morial Convention Center, New Orleans, LA. Among the demos was a VRSG flyover scenario over MVRsimulation's newly built 2 cm terrain of the Prospect Square area of Yuma Proving Ground. The 2 cm per pixel source imagery was captured by MVRsimulation's portable imagery collection UAV, which was built and flown by Swift Radioplanes.
• April 28 - 30, 2016, MVRsimulation visuals were featured in Tru Simulations' V-280 simulator at the Quad A 2016 Summit, Atlanta GA, in Textron's Booth #919.
• February 23 - 24, 2016, MVRsimulation visuals were featured in Close Air Solutions' Joint Fires simulation training demo at the Defence Simulation, Education & Training (DSET) Conference, held at Mshed, Princes Wharf, Wapping Rd, Bristol, UK. The demo was conducted on Close Air Solutions' rugged  Immersive Close Air Support Simulator (iCASS) with a 4-meter curve display from Immersive Display Solutions.
• November 30 - December 4, 2015, MVRsimulation and business partners exhibited their products and technology in Booth #1249 at I/ITSEC 2015, which was held at the Orange County Convention Center, Orlando, FL.
• October 20-21, 2015, MVRsimulation was an associate sponsor of the annual Close Air Support Conference and Exhibition, held at the Hilton Reading Hotel, Reading, UK. MVRsimulation's business partner Close Air Solutions was the lead sponsor. MVRsimulation VRSG was demonstrated as part of Close Air Solutions' iCASS JTAC/FAC training simulator.
• October 12-14, 2015, Bell Helicopter Textron demonstrated its V-280 Valor simulator with MVRsimulation visuals at the AUSA Annual Meeting and Exposition, held at the Walter E. Washington Convention Center, Washington D.C.
• September 15-18, 2015, MVRsimulation's technology was exhibited at DSEI 2015, in booth N7-210, as part of business partner Close Air Solutions' demonstrations on their newly accredited iCASS simulator. This JTAC/FAC simulation training simulator uses MVRsimulation visuals and content. DSEI 2015 was held at the ExCeL, London, UK.
• May 4 - 7, 2015, MVRsimulation's business partner Swift Radioplanes exhibited in Booth #2758 at AUVSI Unmanned Systems 2015 conference, held at the Georgia World Conference Center, Atlanta, GA. Among the demos was a VRSG flyover scenario over MVRsimulation's newly built 2 cm terrain of B-17 and B-19 target ranges at the Fallon, NV, Range Training Complex. The 2 cm per pixel source imagery was captured by MVRsimulation's portable imagery collection UAV, which was built and flown by Swift Radioplanes.
• April 28 - 30, 2105, MVRsimulation exhibited its products and technology at ITEC'2015 in business partner Close Air Solutions' stand #4A-140. Close Air Solutions conducted JTAC/FAC simulation training demonstrations on their new iCASS training simulator, which uses MVRsimulation visuals. Also participating in the simulation training demos were other business partners, Battlespace Simulations and Immersive Display Group. These demos extended to the adjacent stand #4A-340 to include Omnifinity's OmniDeck 6 omnidirectional motorized treadmill. ITEC'2015 was held at PVA Expo Prague Beranových 667, 199 00 Praha 9, Czech Republic. at PVA Expo Prague Beranových 667, 199 00 Praha 9, Czech Republic.
• March 29 - 31, 2015, TRU Simulation unveiled its Bell Helicopter V-280 Marketing Simulator in Booth #322 at the Army Aviation Association of America (Quad-A) Conference, held at the Gaylord Opryland Hotel, Nashville, TN. The V-280 mockup cockpit includes a 6-meter immersive display dome, 6 VRSG channels and MVRsimulation's new V-280 aircraft 3D model.
• December 1 - 4, 2014, MVRsimulation and business partners exhibited their products and technology in Booth #1249 at I/ITSEC 2014, which was held at the Orange County Convention Center, Orlando, FL.
• November 18 - November 19, 2014, MVRsimulation was lead sponsor of the 12th annual Omega Close Air Support Conference and Exhibition, held at the Old Royal Naval College, Greenwich, London. Three presentations included use of MVRsimulation visuals for JTAC training.
• November 4 - 6, 2014, MVRsimulation visuals and terrain were part of the Advanced JTAC Training System (AJTS) immersive dome simulator at the NATO FAC / CAS Conference, to be held in Rust, Germany. The AJTS is a combined effort of QuantaDyn, Battlespace Simulations (BSI), Immersive Display Solutions, and MVRsimulation.
• October 20 - 22, 2014, MVRsimulation visuals and Nellis AFB and Afghanistan terrain datasets were part of ZedaSoft's demo of its Reconfigurable Desktop System (RDS) flight simulator at the Air National Guard Weapons and Tactics Conference (WEPTAC) held at the Doubletree Suites by Hilton Tucson Airport Tucson, AZ.
• October 9 - 11, 2014, MVRsimulation was the host sponsor of the 2014 TACP Association Reunion & Memorial, which took place at Fort Walton Beach, FL.
• September 3 - 15, 2014, MVRsimulation visuals were used at NATO Exercise Ample Strike 2014, held at Namest Air Base, Czech Republic. The Advanced JTAC Training System (AJTS) immersive dome simulator, used in JTAC/FAC simulation training missions at the event, is a combined effort of QuantaDyn, Battlespace Simulations (BSI), Immersive Display Solutions, and MVRsimulation. During the one week exercise, JTAC teams from 12 NATO countries accomplished 95 accredited controls on the AJTS device.
• September 3 - 15, 2014, at NATO Exercise Ample Strike 2014, held at Namest Air Base, Czech Republic, MVRsimulation's business partner Close Air Solutions unveiled its new, immersive Close Air Support Simulator (iCASS). The iCASS, an entry-level NATO-accreditable JTAC/FAC training simulator with a 3-meter dome, uses MVRsimulation's visuals.
• July 7 – 1 August 1 2014, MVRsimulation visuals were part of the Australian Army's Exercise Hamel 2014, held in various defense training areas in North Queensland, Australia. VRSG was used for virtual close air support to live troops on the ground and for the emulated UAV live full motion H.264 video over the network.
• July 10, 2014, MVRsimulation visuals were part of Barco's demonstration of its projectors in a dome display system for the IMAGE Conference post-conference Demo Day, at Barco’s Training & Simulation Demo Center Open House at 600 Bellbrook Avenue, Xenia, Ohio. The dome display system featured Barco 35IR projectors in a dome display from Immersive Display Solutions, with VRSG channels running MVRsimulation's high-resolution 3D terrain of Kismayo, Somalia, and Kabul province, Afghanistan.
• May 20 - 22, 2014, MVRsimulation's business partner ZedaSoft demonstrated its Reconfigurable Desktop System (RDS) in Booth #C135 at ITEC 2014, which was held in Cologne, Germany. The RDS ran ZedaSoft's CBA® for Simulation framework with an F-16 plug-in and MVRsimulation's VRSG and terrain databases. ZedaSoft's Man-in-the-Loop Transfer-of-Control (MiLToCTM) product also demonstrated the transfer of control of a running entity from a constructive to a virtual simulation in real-time. This MiLToC capability is instrumental in an interoperable exercise with Lockheed Martin, Plexsys, and Dutch Space, which was presented twice daily during the conference.
• May 12-15, 2014, MVRsimulation visuals were featured in Divins Tech Solutions' unmanned system EO/IR sensor simulation demonstration in Booth #156 at AUVSI Unmanned Systems 2014, held at the Orange County Convention Center, Orlando, FL.
• May 5-12, 2014, 2014, MVRsimulation visuals were featured in the live-virtual interoperability missions of Bold Quest 14.2 coalition exercises, May 5-22, 2014, at several sites in the U.S. MVRsimulation visuals, terrain, and entity models were used in the Air National Guard Advanced Joint Terminal Attack Controller Training System (AAJTS) during the live-virtual interoperability exercise conducted at Holloman Air Force Base May 5-12, and were also used in an F-16 simulator that was running the software of MVRsimulation's business partner Zedasoft.
• December 2 - 5, 2013, MVRsimulation exhibited its products and technology in Booth #1249 at I/ITSEC 2013, which was held at the Orange County Convention Center, Orlando, FL.
• October 24 - 25, 2013, MVRsimulation was again the lead sponsor of the 11th annual Close Air Support Conference and Exhibition, which was held at the Old Royal Naval College, Greenwich, London. MVRsimulation visuals were part of the AAJTS immersive dome simulator that was demonstrated at the event.
• September 20 - 23, 2013, MVRsimulation visuals were part of the Textron AirLand’s Scorpion Concept Demonstration simulator at the 135th National Guard Association of the United States (NGAUS) Conference and Exhibition, which was held at the Hawaii Convention Center, Honolulu, Hawaii. ZedaSoft developed the simulator to assist Textron AirLand in demonstrating capabilities of the Scorpion aircraft. In addition to MVRsimulation visuals, the demo used MVRsimulation's new Scorpion aircraft 3D model and 3D terrain of North America (with its new 50 cm mpp inset of Hawaii) and Afghanistan (2.5 mpp with 60 cm mpp inset areas).
• September 9 - 19, 2013, MVRsimulation visuals were used in JTAC training missions conducted in the AAJTS immersive dome simulator at the Ramstein Rover 2013 NATO exercise.
• August 12 - 15, 2013, MVRsimulation VRSG was featured in Embry-Riddle Aeronautic University's UAV demonstration in the Student Competition Pavilion at AUVSI 2013, held at the Walter E. Washington Convention Center, Washington DC.
• June 3 - 6, 2013, IMAGE 2013, the 36th Anniversary of the 1st IMAGE Society Conference, Scottsdale, AZ. Presentation by TSC of paper co-written with MVRsimulation, "Real-time visual-to-infrared image generation", on the real-time simulation collaboration of the two companies in the forthcoming VRSG version 5.8.
• December 3 - 6, 2012, MVRsimulation exhibited its products and technology in Booth #1229 at I/ITSEC 2012, which was held at the Orange County Convention Center, Orlando, FL.
• November 5 - 7, 2012, MVRsimulation was again the lead sponsor of the annual Close Air Support Conference and Exhibition, held at the Royal Aeronautical Society in London. MVRsimulation’s VRSG was a component of two presentations given at the conference. MVRsimulation's collaborative demo with Battlespace Simulations (BSI) and Immersive Display Solutions featured a desktop JTAC simulator using the VRSG-BSI MACE solution with a curved display. MVRsimulation and Battlespace Simulations also gave a joint presentation at the conference.
• October 22 - 24, 2012, MVRsimulation visuals were featured during a Textron Systems demonstration in Booth #7628 at AUSA 2012 Annual Meeting and Exposition, held at the Walter E. Washington Convention Center, Washington DC.  During its Tactical Operations Center demonstration, Textron Systems demonstrated a collaboration between Bell Helicopter's Kiowa Warrior simulator located in Huntsville, AL, and AAI's UAS Universal Ground Control Station (UGCS) at the booth. The OH58-D Kiowa Warrior simulator uses MVRsimulation's multi-channel VRSG technology to provide a full out-the-window display, and is capable of LOI 2 interoperability with UAS platforms. AAI's UGCS uses VRSG to simulate UAV payload video from the Shadow Tactical Unmanned Aircraft System. The demonstration featured a mission thread centered on MVRsimulation's high-resolution Afghanistan 3D terrain.
• October 16 - 18, 2012, MVRsimulation demonstrated its products and technology at the 2012 NATO FAC/CAS Conference held at the Edelweiss Conference Center, Garmisch-Partenkirchen, Germany. MVRsimulation demonstrated its portable JTAC simulator using the VRSG-BSI MACE solution.
• May 22 - 24, 2012, AAI featured MVRsimulation visuals in its demos at the Special Operations Forces Industry Conference (SOFIC), held at the Tampa Convention Center, Tampa, FL. In Textron Systems' Booth #704, AAI used eight instances of VRSG to simulate four air and ground platforms in a common area of operation, demonstrating sensor integration in the integrated support of Textron Systems' counter-insurgency village stability operations toolkit (COIN/VSO).
• May 22 - 24, 2012, MVRsimulation's business partner ZedaSoft featured VRSG in product demonstrations at ITEC 2012, held in London. In Booth #D120, ZedaSoft exhibited with Plexsys Interface Products and demonstrated its Portable Simulator Desktop Development Station, CBA for Simulation framework  software with MVRsimulation visuals, running high fidelity virtual entities, and flying over MVRsimulation's Afghanistan and Nellis AFB terrain databases.
• May 9 - 10, 2012, MVRsimulation was invited to exhibit its products and technology, with business partner Battlespace Simulations, at the 15th annual Joint Fires and Joint Close Air Support (JF/JCAS) Symposium, held at the Westin Hotel, Virginia Beach, VA. The symposium was sponsored by the Joint Fire Support Executive Steering Committee and hosted by the Joint Staff J8.
• November 28 - December 1, 2011, MVRsimulation exhibited its products and technology in Booth #1249 at I/ITSEC 2011, held at the Orange County Convention Center, Orlando, FL.
• November 3 - 4, 2011, MVRsimulation was again the lead sponsor of the annual Close Air Support Conference and Exhibition, held at the Royal Aeronautical Society in London.
• May 10 - May 13, 2011, MVRsimulation technology provided the visuals in VR Group applications at IDET 2011, which was held in Brno, Czech Republic. In Booth 63/P, VR Group demonstrated its Reconfigurable Virtual Simulator and Team Lead Simulator, both of which use VRSG visuals.
• May 10 - 12, 2011, ITEC 2011, Koelnmesse Cologne, Germany. ZedaSoft, Inc. demonstrated its Transfer of Control abilities with various high-fidelity entities, with its Portable Simulator Desktop Development Station, and CBA for Simulation framework  software. ZedaSoft's products use MVRsimulation's VRSG for out-the-window visuals. ZedaSoft conducted its demonstrations in Booth #B130 (Plexsys Interface Products' booth).
• January 20 - 21, 2011, MVRsimulation technology was on display at the 2011 Air Education and Training Command (AETC) Symposium, held at the Henry B. Gonzalez Convention Center (HBGCC), San Antonio, TX. In Booth #1005 the 902 MSG/TD Trainer Development from Randolph AFB used MVRsimulation VRSG in its multi-mission crew C130 trainer.  VRSG was provided the visuals in the "Mini-BOSS" desktop refueling trainer.  The 14th Air Training Wing's booth included VRSG as part of its T25-Sect trainer.  VRSG was also demonstrated in Camber Corporation's booth as part of their T1A simulator, which was developed in conjunction with business partner Battlespace Simulations.
• November 29 - December 2, 2010, MVRsimulation exhibited its products and technology in Booth #1345 at I/ITSEC 2010, held at the Orange County Convention Center, Orlando, FL.
• November 3 - 4, 2010, MVRsimulation was again the lead sponsor of the annual Close Air Support Conference and Exhibition, held at the Royal Aeronautical Society, Mayfair, London.
• April 14 - 17, 2010, MVRsimulation demonstrated its products and technology in ZedaSoft's Booth #109 at the AAAA 2010 Conference held in Fort Worth Convention Center, Fort Worth, TX. The booth featured MVRsimulation, ZedaSoft, Immersive Display Solutions, Scalable Display Technologies, and Plexsys showing their integrated simulation training solutions for mission rehearsal.
• January 22, 2010, MVRsimulation participated in the Wharton Aerospace 2010 Conference, which was held at the Wharton campus of the University of Pennsylvania, Irvine Auditorium, 3401 Spruce St., Philadelphia, PA.
• November 30 - December 3, 2009, MVRsimulation exhibited its products and technology in Booth #2380 at I/ITSEC 2009, which was held at the Orange County Convention Center, Orlando, FL.
• October 28 - 29, 2009, MVRsimulation exhibited its products and technology at the Close Air Support Conference and Exhibition, held at the Royal Aeronautical Society, Mayfair, London. MVRsimulation was the lead sponsor of this event. At the event, a MVRsimulation representative was on hand to discuss how MVRsimulation technology is used in CAS and JTAC simulation training and its benefits to trainees. MVRsimulation VRSG was also featured in the presentation "JTAC TRS Training Research Program: Past, Present and Future" given by Jonathan M. Neterer, LT, USAF, JTAC TRS Program Manager at Mesa Air Force Research Labs, Mesa, AZ.
• July 13 - 16 2009, at the IMAGE 2009 Conference & Exhibition, which was held at the Chase Park Plaza, St. Louis, Missouri, L-3Com/Link presented a paper on which MVRsimulation collaborated, A Method to Compensate for Display System Contrast Ratio Differences in Distributed Simulation, at the Distributed Sensing & Visualization- Part 1 session.
• June 22 - 26, 2009, MVRsimulation was invited to demonstrate its products and technology at the ANG TACP/ASOC Simulation Summit, hosted by the 182nd Air Support Operations Group IL ANG, which was held at the Peoria Air National Guard Base in Peoria, IL.
• May 12 - 14, 2009, ITEC 2009, ZedaSoft demonstrated, in Stand C110, the Distributed Missions Operations / Training (DMO) with its Portable Simulation Demonstrator (using MVRsimulation visuals) featuring exercises over Kabul using MVRsimulation's Afghanistan database.
• May 5 - 7, 2009, International Exhibition of Defence and Security Technologies (IDET) 2009,MVRsimulation exhibited in VR Group's Booth #PAV F-079, Brno Exhibition Centre, Brno, Czech Republic.
• December 1 - 4, 2008, Interservice/Industry Training, Simulation and Education Conference (I/ITSEC'2008), MVRsimulation exhibited in Booth #1639, Orange County Convention Center, Orlando, FL, USA.
• November 26 - 29, 2007, Interservice/Industry Training, Simulation and Education Conference (I/ITSEC'2007), MVRsimulation exhibited in Booth #1901, Orange County Convention Center, Orlando, FL, USA.
• December 4 - 7, 2006, Interservice/Industry Training, Simulation and Education Conference (I/ITSEC'2006), MVRsimulation exhibited in Booth #1331, Orange County Convention Center, Orlando, FL, USA.
• November 28 - December 1, 2005, Interservice/Industry Training, Simulation and Education Conference (I/ITSEC'2005), MVRsimulation exhibited in Booth #1058, Orange County Convention Center, Orlando, FL, USA.
• December 6 - 9, 2004 Interservice/Industry Training, Simulation and Education Conference (I/ITSEC'2004), MVRsimulation exhibited in Booth #1030, Orange County Convention Center, Orlando, FL, USA.
• October 25 - 27, 2004, Association of the United States Army (AUSA) conference at the Washington D.C. Convention Center. Cubic Corporation demonstrated its Engagement Skills Trainer (EST) 2000, which is a component system used for convoy training. The EST 2000 uses VRSG visuals, and was running its MVRsimulation-built Baghdad database at the conference.
• September 12 - 17, 2004, 126th National Guard Association of the United States (NGAUS) General Conference and Exhibition in Las Vegas, Nevada. Lockheed Martin demonstrated an F16 full mission trainer simulator, which uses MVRsimulation's VRSG for the out-the-window visuals.
• December 1- 4, 2003, Interservice/Industry Training, Simulation and Education Conference (I/ITSEC'2003), MVRsimulation exhibited in Booth #1361, Orange County Convention Center, Orlando, FL, USA.
• October, 2003, Association of the United States Army (AUSA) conference. In the PEO-STRI booth, Fidelity Technologies demonstrated its Call for Fire Trainer (CFFT) which uses MVRsimulation VRSG for its Artillery Trainer and Simulation System.
• September 15 - 17, 2003, 125th National Guard Association of the United States (NGAUS) General Conference and Exhibition, at the Convention Center in Biloxi, Mississippi. Lockheed Martin demonstrated an F16 full mission trainer simulator, which uses MVRsimulation's VRSG for the out-the-window visuals.
• September 9 - 12, 2003, Defence Systems and Equipment International Exhibition and Conference (DSEi 2003), at the ExCeL Center in London. AEgis Technologies Group demonstrated its BattleStorm helicopter simulator, which uses a MVRsimulation visual system.
• July 15 - 17, 2003, AUVSI's Unmanned Systems 2003 Symposium and Exhibition 2003 at the Baltimore Convention Center, Baltimore, Maryland. These companies demonstrated systems that use MVRsimulation 3D technology:
  - AAI Corporation
  - CDL Systems
  - Joint Technology Center / Systems Integration Laboratory, MUSE Systems Engineering Team
• April 28 - 30, 2003, International Exhibition of Defence (IDET) 2003 in Brno, Czech Republic. These companies demonstrated systems that use MVRsimulation 3D technology:
  - Fidelity Technologies in Pavilion Z, booth 068.
  - VR Group Exhibition Hall Z, booth 45.
• December 2 - 5, 2002, Interservice/Industry Training, Simulation and Education Conference (I/ITSEC'2002), MVRsimulation exhibited in Booth #1264, Orange County Convention Center, Orlando, FL, USA.
• July 9 - 11, 2002, AUVSI 2002, The Association for Unmanned Vehicle Systems (AUVSI) International Symposium and Exhibition, JTC/SIL Booth #216, and AMCOM Booth #218, Disney's Coronado Springs Resort, Lake Buena Vista, FL, USA.
• November 26 - 29, 2001, Interservice/Industry Training, Simulation and Education Conference (I/ITSEC'2001), MVRsimulation exhibited in Booth #1130, Orange County Convention Center, Orlando, FL, USA.
• November 27 - 30, 2000, Interservice/Industry Training, Simulation and Education Conference (I/ITSEC'2000), MVRsimulation and Digital Realms in Booth #1230, Orange County Convention Center, Orlando, FL, USA.
• November 15-18, 2000, IAAPA 2000 Annual Convention & Trade Show, Atlanta, Georgia USA, i2STAR Booth #9154, Amusement and Entertainment Technology/High Tech area.
• July 10 - 14, 2000, IMAGE Society, IMAGE 2000 Conference, Scottsdale, AZ, USA.
• July 11 - 13, 2000, AUVSI 2000, The Association for Unmanned Vehicle Systems (AUVSI) International Symposium and Exhibition, JTCSIL Redstone Booth #209, Orlando, FL, USA.
• November 29 - December 2, 1999, Interservice/Industry Training, Simulation and Education Conference (I/ITSEC'99), Booth #569, Orlando, FL, USA.
• August 10 - 12, 1999, 26th International Conference on Computer Graphics and Interactive Techniques, General Reality's Booth #1052, Los Angeles, CA, USA.
• July 12 - 16, 1999, AUVSI '99, The Association for Unmanned Vehicle Systems International (AUVSI) 26th Annual Symposium and Exhibition, Booth #632, Baltimore, MD, USA.
• May 9 - 12, 1999, AAAA Annual Convention, Kentucky Fair and Exposition Center, Louisville, KY, USA.
• November 30 - December 2, 1998, Interservice/Industry Training, Simulation and Education Conference (I/ITSEC'98) , Booth #926, Orlando, FL, USA.
• August 2 - 7, 1998, IMAGE 98 Conference, Scottsdale, AZ, USA.
• July 19 - 24, 1998, SIGGRAPH 98, Orlando, FL, USA  (in the InterSense Booth 1317).
• June 12, 1998, Massachusetts Software Council 1998 Investment Conference, Boston, MA, USA.
• May 28, 1998, Panelist for MIMC CyberArtisan, "What is Massachusetts doing for interactive companies?", Boston, MA, USA.
• April 28 - 30, 1998 ITEC 98, Palais de Beaulie, Lausanne, Switzerland (in the InterSense Booth).
• December 1 - 4, 1997, 19th Interservice/Industry Training Systems and Education Conference (I/ITSEC), Orlando, FL, USA.
• October 13 - 15, 1997, AUSA Annual Meeting, Washington, D.C., USA (in the Reflectone booth).
• September 8 - 12, 1997, The Simulation Interoperability Standards Organization (SISO) Simulation Interoperability Workshop, Holiday Inn, International Drive, Orlando, FL, USA.
• August 5 - 7, 1997, SIGGRAPH 97, Quantum3D Booth 2057, Los Angeles Convention Center, Los Angeles, CA, USA.
• July 13 - 18, 1997, IMAGE Society, The 1997 IMAGE SIG SYMPOSIA, Scottsdale, AZ, USA.
• April 27 - 29, 1997, Computer Game Developers Conference, Santa Clara Convention Center, Santa Clara, CA, USA.
• April 23 - 26, 1997, AAAA Annual Convention, Kentucky Fair and Exposition Center, Louisville, KY, USA.
• April 22 - 26, 1997, Air Force Association's Air Force Fifty, Las Vegas Convention Center, Las Vegas, Nevada USA.
• March 3 - 7, 1997, The Simulation Interoperability Standards Organization (SISO) Simulation Interoperability Workshop, Holiday Inn, International Drive, Orlando, FL, USA.
• December 2 - 5, 1996, 18th Interservice/Industry Training Systems and Education Conference (I/ITSEC), Orlando, FL, USA.